Wednesday, October 21, 2009

Herding People Like Cattle



Why in the world would I post such a crummy photo?

It is to make a point.

Look how all of the fuzzy people are grouped together. Notice that they are all herded roughly along the dark grey line on the floor.

There is no sign that says, “Stay on this side of the line.” There isn’t even a definite traffic pattern that people must follow. In fact, there isn’t anything in this room except for a few stairs and columns. It is a large, open room where people wait until their trains are called out at Penn Station of NYC.

This is another example to show how people are affected by their surroundings. Even if there are subtle color changes on the floor, people will react to it without even realizing that they are doing it.

If people can be so affected by the design of their surroundings by purely accidental design, imagine how powerful it can be if you have an architect that uses the “Experience Architecture” design philosophy with intension!

With “Experience Architecture,” can you see how your customers might want to keep coming back to your store? Can you see how your employees might want to stay at least a full 8 hour day in the office and actually contribute to a full day’s work? Can you see how an entire dying historical downtown can attract the affluent through intentional design?

“Experience Architecture” is POWERFUL! Make it work for you, your business, and your downtown. Here's how:

Come to the Preservation Conference and the Main Street Forum to hear me elaborate on this very important subject. I am going to share some cutting edge strategies that can boost your business and revive your downtowns in any economy. The event will be in Liberty, NY on November 1st and 2nd. Just click on the “Main Street Forum” icon to the right to register.

If you like this article and would like to keep informed about other important news of the day, please subscribe to this blog by clicking on the buttons along the right column.

Click on the "ReTweet" button below and follow me on twitter. I am LaneArch there.



Saturday, October 10, 2009

How to Fill Vacant Commercial Properties


There is no place you should rather be than in Liberty, NY on November 1st and 2nd this year.

Liberty, NY is the town that was had to lend a helping hand to the wayward hippies that found themselves cold, hungry, and in need of first aid during the famous Woodstock concert.

Liberty, NY is now the destination of many movers and shakers who want to learn from experts how to revive their dying downtowns and create massive profits within their central business districts.

Come join other forward thinkers, NY and NJ state officials, town planners, merchants of downtown shops, architects, and leaders of a lot of townships throughout the east coast to become a leader of progress for your community.

For the third year in a row, I have been invited to speak at the Main Street Forum that is Monday, November 2nd, 2009. My topic will be for advanced thinkers at the Catskill Artists Gallery at 11:00 AM EST.

The title of my talk is, "How to Make Your Workplace Work for You."

As retailers close stores and corporations downsize, what are some new and productive uses for this excess space? We’ll look at new concepts, new uses, and old but half-forgotten solutions that can turn vacant properties into cash-flowing asset during our information packed 40 minute disussion.

You will also learn some key green design solutions that others are doing that immediately puts money back in their pockets for ZERO personal investments, and see successful case studies that will make you want to go make it happen at your own hometown.

Be sure to sign up for this event NOW! Just click on the black and white Main Street Forum icon at the blue column of information to the right of this blog post.

Oh, by the way, we will also be talking about some key proven stategies found in the book, "The Designed Office." Get your copy by clicking on the book icon to the right of this post to get a head start. Then, we can build upon what you already read from the book.

If you like this article and would like to keep informed about other important news of the day, please subscribe to this blog by clicking on the buttons along the right column.

Click on the "ReTweet" button below and follow me on twitter. I am LaneArch there.



Thursday, October 8, 2009

Wind Energy Systems



I can still hear his annoying hyena sounding laugh over 30 years later. He taught freshman architectural design at my alma mater, Texas Tech University.

If you take a look at the photo above, you will see his office window. It is located in that dark vertical slot between the two bulks of the building. The window looks down onto a bridge that connects this sidewalk (in the foreground) to the entrance just under this slot.

Below the bridge is a courtyard that funnels 100 mph wind on some of the most commonly occurring wind/sand storms of Lubbock, TX.

I used to stand at a 45 degree angle against this wind tunnel.

Poor freshmen would carry detailed models of their architectural design that they worked on for weeks in their nearby dorm. The models would explode from the burst of wind over and under the bridge. This is what really amused this professor. Fortunately, it did not happen to me.

Wind can be a nuisance and it can also be an asset. Architects are learning about more ways to harness the wind in order to generate energy and to produce fascinating forms. If you are considering installing a small wind system in your home, check out this article from http://www1.eere.energy.gov/windandhydro/small_wind_system_faqs.html

Ah, go ahead and scroll past the really technical stuff….

Frequently Asked Questions on Small Wind Systems

Below are frequently asked questions related to using a small wind energy system to power your home. The frequently asked questions below will help you determine if a small wind energy system is practical for powering your home.

By investing in a small wind system, you can reduce pollution and reduce your exposure to future fuel shortages and price increases. Deciding whether to purchase a wind system, however, is complicated; there are many factors to consider. But if you have the right set of circumstances, a well-designed wind energy system can provide you with many years of cost-effective, clean, and reliable electricity.

What are the benefits to homeowners from using wind turbines?

Wind energy systems provide a cushion against electricity price increases. Wind energy systems reduce U.S. dependence on fossil fuels, and they don't emit greenhouse gases. If you are building a home in a remote location, a small wind energy system can help you avoid the high costs of extending utility power lines to your site.

Although wind energy systems involve a significant initial investment, they can be competitive with conventional energy sources when you account for a lifetime of reduced or altogether avoided utility costs. They length of the payback period — the time before the savings resulting from your system equal the system cost — depends on the system you choose, the wind resource in your site, electric utility rates in you're area, and how you use your wind system.

Is wind power practical for me?

Small wind energy systems can be used in connection with an electricity transmission and distribution system (called grid-connected systems), or in stand-alone applications that are not connected to the utility grid. A grid-connected wind turbine can reduce your consumption of utility-supplied electricity for lighting, appliances, and electric heat. If the turbine cannot deliver the amount of energy you need, the utility makes up the difference. When the wind system produces more electricity than the household requires, the excess can be sold to the utility. With the interconnections available today, switching takes place automatically. Stand-alone wind energy systems can be appropriate for homes, farms, or even entire communities (a co-housing project, for example) that are far from the nearest utility lines. Either type of system can be practical if the following conditions exist.

Conditions for stand-alone systems

• You live in an area with average annual wind speeds of at least 4.0 meters per second (9 miles per hour)
• A grid connection is not available or can only be made through an expensive extension. The cost of running a power line to a remote site to connect with the utility grid can be prohibitive, ranging from $15,000 to more than $50,000 per mile, depending on terrain.
• You have an interest in gaining energy independence from the utility
• You would like to reduce the environmental impact of electricity production
• You acknowledge the intermittent nature of wind power and have a strategy for using intermittent resources to meet your power needs
Conditions for grid-connected systems
• You live in an area with average annual wind speeds of at least 4.5 meters per second (10 miles per hour).
• Utility-supplied electricity is expensive in your area (about 10 to 15 cents per kilowatt-hour).
• The utility's requirements for connecting your system to its grid are not prohibitively expensive.
• Local building codes or covenants allow you to legally erect a wind turbine on your property.
• You are comfortable with long-term investments.

Is my site right?

To get a general idea if your region has good wind resources, look at the state wind maps. The maps will show you if wind speeds in your area are strong enough to further investigate the wind resource. Of course, the maps are just a starting point — the actual wind resource on your site will vary depending on topography and structure interference. And a localized site with good winds, such as a ridge top, may not show up on the maps.

Another source for wind data is the National Climatic Data Center, which collects data for selected sites and makes area wind data summaries available for purchase.
You will need site-specific data to determine the wind resource at your exact location. If you do not have on-site data and want to obtain a clearer, more predictable picture of your wind resource, you may wish to measure wind speeds at your location for a year. You can do this with a recording anemometer, which generally costs $500 to $1500. The most accurate readings are taken at "hub height" (i.e., the elevation at the top of the wind turbine tower). This requires placing the anemometer high enough to avoid turbulence created by trees, buildings, and other obstructions. The standard wind sensor height used to obtain data for the DOE maps is 10 meters (33 feet).

You can have varied wind resources within the same property. If you live in complex terrain, take care in selecting the installation site. If you site your wind turbine on the top or on the windy side of a hill, for example, you will have more access to prevailing wind than in a gully or on the leeward (sheltered) side of a hill on the same property. Consider existing obstacles and plan for future obstructions, including trees and building, which could block the wind. Also realize the power in the wind is proportional to its speed (velocity) cubed (v�). This means that the amount of power you get from your generator goes up exponentially as the wind speed increases. For example, if your site has an annual average wind speed of about 5.6 meters per second (12.6 miles per hour), it has twice the energy available as a site with a 4.5 meter per second (10 mile per hour) average (12.6/103).

What about legal, environmental, and economic issues?

In addition to reviewing your site and particular situation and goals, you should also
• research potential legal and environmental obstacles
• obtain cost and performance information from manufacturers
• perform a complete economic analysis that accounts for a multitude of factors
• understand the basics of a small wind system, and
• review possibilities for combining your system with other energy sources, backups, and energy efficiency improvements.
Establish an energy budget to help define the size of turbine that will be needed. Since energy efficiency is usually less expensive than energy production, making your house more energy efficient first will likely result in being able to spend less money since you may need a smaller wind turbine to meet your needs.

Potential Legal and Environmental Obstacles

Before you invest any time and money, research potential legal and environmental obstacles to installing a wind system. Some jurisdictions, for example, restrict the height of the structures permitted in residentially zoned areas, although variances are often obtainable. Your neighbors might object to a wind machine that blocks their view, or they might be concerned about noise. Consider obstacles that might block the wind in the future (large planned developments or saplings, for example). If you plan to connect the wind generator to your local utility company's grid, find out its requirements for interconnections and buying electricity from small independent power producers.

Pricing a System

When you are confident that you can install a wind machine legally and without alienating your neighbors, you can begin pricing systems and components.
Approach buying a wind system as you would any major purchase. Obtain and review the product literature from several manufacturers. Lists of manufacturers are available from the American Wind Energy Association; however, not all small turbine manufacturers are members of AWEA. Manufacturer information can also be found at times in the periodicals listed below. Once you have narrowed the field, research a few companies to be sure they are recognized wind energy businesses and that parts and service will be available when you need them. Also, find out how long the warranty lasts and what it includes.

Ask for references of customers with installations similar to the one you are considering. Ask system owners about performance, reliability, and maintenance and repair requirements, and whether the system is meeting their expectations.

The Economics of Wind Power for Home Use

A residential wind energy system can be a good long-term investment. However, because circumstances such as electricity rates and interest rates vary, you need to decide whether purchasing a wind system is a smart financial move for you. Be sure you or your financial adviser conduct a thorough analysis before you buy a wind energy system.

Grid-connected-system owners may be eligible to receive a small tax credit for the electricity they sell back to the utility. The National Energy Policy Act of 1992 and the 1978 Public Utilities Regulatory Policy Act (PURPA) are two programs that apply to small independent power producers. PURPA also requires that the utility sell you power when you need it. Be sure you check with your local utility or state energy office before you assume any buy-back rate. Some Midwestern rates are very low (less than $.02/kWh), but some states have state-supported buy-back rates that encourage renewable energy generation. In addition, some states have "net billing," where utilities purchase excess electricity for the same rate at which they sell it.
Also, some states offer tax credits and some utilities offer rebates or other incentives that can offset the cost of purchasing and installing wind systems. Visit the DSIRE web site, which contains a database of financial incentives for wind energy. Check with your state's department of revenue, your local utility, public utility commission, or your local energy office for information.

What equipment do I need to run my own home wind energy system?

All wind systems consist of a wind turbine, a tower, wiring, and the "balance of system" components: controllers, inverters, and/or batteries. Hybrid systems use additional equipment, like photovoltaic panels and diesel generators to ensure electricity is available at all times.

Wind Turbines

Home wind turbines consist of a rotor, a generator mounted on a frame, and (usually) a tail. Through the spinning blades, the rotor captures the kinetic energy of the wind and converts it into rotary motion to drive the generator. Rotors can have two or three blades, with three being more common. The best indication of how much energy a turbine will produce is the diameter of the rotor, which determines its "swept area," or the quantity of wind intercepted by the turbine. The frame is the strong central axis bar onto which the rotor, generator, and tail are attached. The tail keeps the turbine facing into the wind.

A 1.5-kilowatt (kW) wind turbine will meet the needs of a home requiring 300 kilowatt-hours (kWh) per month, for a location with a 6.26-meters-per-second (14-mile-per-hour) annual average wind speed. The manufacturer will provide you with the expected annual energy output of the turbine as a function of annual average wind speed. The manufacturer will also provide information on the maximum wind speed in which the turbine is designed to operate safely. Most turbines have automatic speed-governing systems to keep the rotor from spinning out of control in very high winds. This information, along with your local wind speed distribution and your energy budget, is sufficient to allow you to specify turbine size.

Towers

To paraphrase a noted author on wind energy, "the good winds are up high." Because wind speeds increase with height in flat terrain, the turbine is mounted on a tower. Generally speaking, the higher the tower, the more power the wind system can produce. The tower also raises the turbine above the air turbulence that can exist close to the ground. A general rule of thumb is to install a wind turbine on a tower with the bottom of the rotor blades at least 9 meters (30 feet) above any obstacle that is within 90 meters (300 feet) of the tower.

Experiments have shown that relatively small investments in increased tower height can yield very high rates of return in power production. For instance, to raise a 10-kW generator from a 18-meter (60-foot) tower height to a 30-meter (100-foot) tower involves a 10% increase in overall system cost, but it can produce 25% more power.
There are two basic types of towers: self-supporting (free standing) and guyed. Most home wind power systems use a guyed tower. Guyed-lattice towers are the least expensive option. They consist of a simple, inexpensive framework of metal strips supported by guy cables and earth anchors.

However, because the guy radius must be one-half to three-quarters of the tower height, guyed-lattice towers require enough space to accommodate them. Guyed towers can be hinged at the base so that they can be lowered to the ground for maintenance, repairs, or during hazardous weather such as hurricanes. Aluminum towers are prone to cracking and should be avoided.

Balance of System

Stand-alone systems require batteries to store excess power generated for use when the wind is calm. They also need a charge controller to keep the batteries from overcharging. Deep-cycle batteries, such as those used to power golf carts, can discharge and recharge 80% of their capacity hundreds of times, which makes them a good option for remote renewable energy systems. Automotive batteries are shallow-cycle batteries and should not be used in renewable energy systems because of their short life in deep cycling operations.

In very small systems, direct current (DC) appliances operate directly off the batteries. If you want to use standard appliances that require conventional household alternating current (AC), however, you must install an inverter to convert DC electricity to AC. Although the inverter slightly lowers the overall efficiency of the system, it allows the home to be wired for AC, a definite plus with lenders, electrical code officials, and future homebuyers.

For safety, batteries should be isolated from living areas and electronics because they contain corrosive and explosive substances. Lead-acid batteries also require protection from temperature extremes.

In grid-connected systems, the only additional equipment is a power-conditioning unit (inverter) that makes the turbine output electrically compatible with the utility grid. No batteries are needed. Work with the manufacturer and your local utility on this.

Hybrid Systems

According to many renewable energy experts, a stand-alone "hybrid" system that combines wind with photovoltaic (PV) technologies and/or a diesel generator offers several advantages.

In much of the United States, wind speeds are low in the summer when the sun shines brightest and longest. The wind is strong in the winter when there is less sunlight available. Because the peak operating times for wind and PV occur at different times of the day and year, hybrid systems are more likely to produce power when you need it.

For the times when neither the wind generator nor the PV modules are producing electricity (for example, at night when the wind is not blowing), most stand-alone systems provide power through batteries and/or an engine-generator powered by fossil fuels like diesel.

If the batteries run low, the engine-generator can be run at full power until the batteries are charged. Adding a fossil-fuel-powered generator makes the system more complex, but modern electronic controllers can operate these complex systems automatically. Adding an engine-generator can also reduce the number of PV modules and batteries in the system. Keep in mind that the storage capability must be large enough to supply electrical needs during noncharging periods. Battery banks are typically sized for one to three days of windless operation.

If you like this article and would like to keep informed about other important news of the day, please subscribe to this blog by clicking on the buttons along the right column.

Click on the "ReTweet" button below and follow me on twitter. I am LaneArch there.